Flywheel Step Specs - All Makes
The flywheel "step" specification is a very important factor for smooth and proper operation of any clutch.
When having your existing flywheel machined please keep in mind there are normally 2 types of machines used. A flywheel "cutting tip" or "lathe" type, and a flywheel "grinder" type. A flywheel "grinder" type usually removes far less material resulting in many more years of use out of your existing flywheel. Many machine shops, however, do not have a flywheel "grinder" type due to the extra cost. ("note" Always make sure a recess, or a sharp corner, is cut where your pressure plate mounts so that it is not held out slightly)

We offer a used or New Flywheels and New or Remanufactured Clutches at a fraction of OEM cost that are ready to install.

The following specifications should be double-checked carefully against manufacturer flywheel specs and pressure plate specs. Many manufacturers have several clutch configurations for each model. When in doubt feel free to contact us or call.

ALLIS CHALMERS TRACTORS
WC, WD WD45 - 1.188"
D17 & D17 Series 1V, D19 - 1.437"
D21 - 2.042"
170, 175, 180, 190, 109XT, 200 - 1.437"
210, 220 - 2.042"
7000 - 1.437"
7010 Power Director - .178"
7020 Power Director - .178"
7045 Power Director - .178"
8010 Power Director - .178"
7010 Power Shift - 1.437"
7020 Power Shift - 1.437"
7040 Power Shift - 1.437"
7060 Power Shift - 1.437"
8010 Power Shift - 1.437"
7030 Torque Limiter - .178"
7050 Torque Limiter - .178"
7080 Torque Limiter - .178"
7580 Torque Limiter - .178"
7045 Power Shift - .178"

CASE TRACTORS
400 - 1.406"
700 - 1.406"
730 - 1.406"
770 - 1.406"
830 - 1.406"
870 - 1.406"
930 - 1.755"
1030 - 1.755"
1070 - 1.755"
1090 - 1.755"
1170 - 1.755"
1175 - 1.755"

CASE/IH TRACTORS
11" Clutch
385, 395, 485, 495, 585, 595, 685, 695, 785, 885, 985, 995, 3210, 3220, 3230, 3400, 3434 - 1.443"
12" Clutch
485, 495, 585, 595, 685, 695, 785, 795, 885, 895, 985, 995, 3210, 3220, 3230, 3400, 3434, 4210, 4220, 4230, 4240 - 1.406"

FORD TRACTORS
230A, 231, 233, 234, 333, 530A, 531, 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2600N, 2610, 3000, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 4000, 4110 (11" dual stage w/ 3 lever PPA) - 1.710"
TW20, TW25, TW30, TW35, 8630, 8730, 8830 (14" single stage) - 2.048"
FW20, FW30, FW40 (14" Dual Disc) - 2.938"

JOHN DEERE TRACTORS
2010 (10" Clutch) - 1.180"
2510 - 2.844"
2520 - 2.844"
3010 - 2.844"
3020 - 2.844"
4000 - 2.844"
4010 - 2.844"
4020 - 2.844"
4320 - 2.964"
5010 - 3.207" - 3.217"
5020 - 3.207" - 3.217"
6030 - 3.207" - 3.217"
7520 - 3.207" - 3.217"
For the following John Deere models, or any other model not listed, please call for specs:
820, 1020, 1050, 2020, 830, 1530, 2030, 2630, 2040, 2240, 2440, 2640, 2840, 2940, 2150, 2350, 2550, 2750, 2950, 3150, 2155, 2255, 2355, 2555, 2755, 2855, 2955, 3150, 3155.

IH TRACTORS
7" Clutch
TA Flywheel - .900"
9" Clutch
A, Super A, B, C, Super C, 100, 130, 140, 200, 230, 240 - 1.188"
10" Clutch
H - 1.188"
10 1/2"Clutch
Super H, W4, Super W4, 300, 340, 350, 460, 504, 544, 606 - 1.188"
11" Clutch
M, MD, W6, WD6 - 1.406"
354, 364, 384, 414, 424, 444, 2424, 2444, 3444 (Dual Stage Clutch) - 1.344"
384, 454, 464, 474, 484, 574, 584, 674, 684, 784, 884, 2400A, 3400 - 1.443"
656, 666, 686 - 1.437"
12" Clutch
MD, Super MD, Super M, Super MTA, Super W6, W9, Super 9, WD, Super WD9, WDR, 384, 400, 450, 560, 584, 650, 660, 674, 684, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 3088, 3288, 3688, 815 Combine, 915 Combine - 1.406"
14" Clutch
1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4100, 4156, 4300, 4356 - 1.938"
3388, 3588, 3788, 6388, 6588, 6788 - 2.048"
4568 - 2.938"

MASSEY FERGUSON TRACTORS
235, 245, 135 (equipped with 10 1/2" clutch) - 1.137"
165, 175, 180, 265 (equipped with 11" single stage) - 1.406"
All tractors equipped with a forged lever dual stage PPA - 1.710"
85, 88, Super 90 - .434"
285, 220, 1080, 1085 - 1.407"
1100, 1130, 1150 (equipped with single disc clutch) - .410"
1100, 1130, 1150 (equipped with double disc clutch) - 1.050"
1105, 1135, 1155 - 1.182" - 1.192"
2640, 3505, 3525, 3545 (equipped with diaphragm PPA) - 1.340"
2675, 2705 (single disc) - 1.830"
2775, 2745, 2805 (double disc) - 2.895"

MASSEY FERGUSON COMBINES
300, 310, 410, 510, 540, 550, 750 (equipped with 8" clutch) - 1.882"
750, 850, 855 (equipped with 9" clutch) - 2.074"
850, 860, 865 (equipped with 12" clutch) - 1.406"

MINNEAPOLIS MOLINE TRACTORS
G900 - 1.406"
G950 - 1.406"
G1000 - 2.048"
G100 Vista - 2.048"
G1050 - 2.048"
G1350 - 2.048"
M5 - 1.406"
M504 - 1.406"
M602 - 1.406"
M604 - 1.406"
M670 - 1.406"

OLIVER WHITE TRACTORS
All Models with 12" Clutch Small Step Flywheel - .125"
All Models with 13" Clutch Small Step Flywheel - .125"
1800 12" Clutch - .750"
1900 14" Clutch - 1.215"
1950 14" Clutch 1.215"
2150 - 1.215"
2-55 - 1.437"
2-65 - 1.437"
2-70 - .125"
2-75 - 1.437"
2-78 - .125"
4-78 - .125"
2-115 - 1.215"
4-115 - 1.215"
2- 135 - 1.215"
2-155 - 1.215"
120 - 1.186"
140 - 1.186"

A&I Store PowerMax Catalog
Injection Pump Store Tisco Catalog